Trunkings for HVAC 31

Different assembly systems to choose from,
depending on the base

Detachable strip for HVAC with pre-cuts

• Freedom to choose the length of the base without needing to cover the whole wall section.
• Easy to measure and align the sections without using tools.
• Good finishing system, because it absorbs the wall unevenness.

Single base plate for HVAC

• A solid piece for each cover width, which ensures system robustness.
• No need to alter or cut the base to install it.
• Fast assembly, because the base is directly positioned on the wall following the straight level line marked previously on the wall.

Pipe clamp

• Clamp for fixing drainage pipes in air-conditioning systems.
• Can also be used to fix electrical, water, sanitary and other pipes.
• The diameter of the pipes must be between 16 and 20 mm.
• Suitable for outdoor use.
   

Easy to install
pipes and cables

• Possibility of choosing the most suitable Unex cable ties dimension, up to 7.6 mm width, ensuring the anchoring of pipes and cables.
• The base slots allow new cable ties to be placed without disassembling material already installed.
• The fastening of pipes and cables is completely independent.

C-shape cover
for the Trunking 31

• Rectilinear design that integrates with the construction elements, giving the system a nice finishing.
• Its rigidity ensures good anchoring to the base and prevents deformations.
• A single part number for the two types of base.

Fittings

• Fittings with bending radii suitable for the laying of the pipes that guarantee a correct function of the installation.
• Robust, single piece design, assembled above the cover, hiding the cuts.
• Greater length of the fittings to better adapt to the cover and absorb the wall unevenness.

C-shape cover
with protective film

• No scratches or stains: protected with film, our Trunking 31 arrives in perfect conditions to the site. 
• Once the assembly is finished, removing the film is easy and fast, leaving a clean and neat installation.